🏷️#2705[BRAND NAME] + [PRODUCT]

📝 Summary

[BRAND NAME] + [PRODUCT] Act as a Senior Luxury Fashion Art Director and Studio Photographer specializing in high end...

[BRAND NAME] + [PRODUCT]

作为一名高级奢侈品时装艺术总监和棚内摄影师，专注于旗舰活动的高端产品主视觉、本页电商图像和移动优先的品牌内容。

PHASE 1: FORMAT & CANVAS
垂直格式，9:16 纵横比。画布背景：单一平面暖米白——不是纯白，也不是灰色。目标色调：柔和象牙奶油色（等同于 #F4EFE6），整个背景平面均匀且完全无阴影。
自主确定 [BRAND NAME] 的签名背景色调——如果品牌在包装、薄纸或画册背景上有公认的专属色，应将画布向该特定暖米白或中性色偏移。最终效果必须感觉像官方品牌文件，而非通用摄影棚背景。

PHASE 2: BACKGROUND PATTERN (WATERMARK LAYER)
自主识别 [BRAND NAME] 标志性的表面图案、字母组合或档案花纹——例如：品牌字母图案（monogram）、花卉印花（toile）、几何标志重复、传统徽章或标志性纺织图案。
将该图案以水印形式渲染覆盖整个背景画布：与背景同色但有轻微亮度偏移（约比基底深或浅 8%–12%）。图案应大比例呈现——单个图形占画布宽度的 15%–25%。不透明度：最大 10%–18%。无硬边。图案应呈现压印或同色织物感，而非印刷感。必须位于所有其它元素之后，隐退背景之中。

PHASE 3: LOGO PLACEMENT
自主忠实再现 [BRAND NAME] 官方标识——正确的字形、比例、次级标记（徽章、皇冠、星形、字母组合图标等）。
将标识水平居中置于画面上三分之一区域（画布顶部 30%）。比例：标识宽度应占画布宽度约 40%–50%——醒目但不过分主导。
标识呈现：平面 2D，无挤出、无铬面效果。颜色：自主应用 [BRAND NAME] 官方标识配色——使用官方包装与网站上的品牌标准色。如果品牌使用双色标识（图标 + 字标为不同颜色），请精确保留该层级关系。
在主标志下方紧接放置完整的 [BRAND NAME] 字标，字母间距拉开为大写字母——干净、几何感的无衬线体，字距：+200 至 +300，颜色同品牌色，视觉得大小约为主标志高度的 60%。标志与字标之间不得有装饰性元素。

PHASE 4: PRODUCT PLACEMENT
将 [PRODUCT] 以超写实棚内物体渲染，追求最高材质还原度：
— 皮革：可见纹理、毛孔结构、缝线线头纹理、真实的包边漆面。
— 金属件：金色或银色金属，带微小反射，不平面化。
— 帆布/织物：可见纤维编织细节，非平滑 CG 表面。
— 产品上的所有品牌专有表面图案必须准确且清晰可辨。
摆放：产品从画面右下角进入，呈自然 25°–35° 角度，仿佛随意放置或正处于运动中。画面裁切：仅显示物件的 60%–75%。裁切应有意图感、具编辑感，而非意外。产品占据画布底部 55%–65% 区域。
产品必须在空间中有真实的存在感——不可悬浮。在最邻近边缘下方投极其柔和、几乎不可见的接触阴影（不透明度 8%–12%）。无硬质投影。

PHASE 5: LIGHTING
光线：模拟大型朝北的棚窗光。柔和且具有方向性，背景上无阴影。色温：5500–6000K（中性日光，略偏冷）。
主光：来自左上方的大型柔光箱等效，均匀覆盖整个产品表面，最小对比度比为 1.2:1 至最大 1.5:1。
补光：来自右侧的大型反射，消除所有强烈阴影。无轮廓光。无戏剧性对比。光学理念为：“产品自我推销——光线仅用于呈现，从不做表演。”
启用全局光照以产生产品表面间微妙的相互反射。皮革上无高光眩点——高光仅出现在金属五金上。

PHASE 6: TYPOGRAPHY & FINISHING
画面底部：一条细水平分隔线（1px，品牌色，覆盖画布宽度的 80%，居中）。分隔线下方：一行微文案——社交账号、系列名或活动标签——使用相同的干净无衬线字体，小写或小型大写字母，极小字距。为 [BRAND NAME] 自主生成一个情境上合适的标签。

TECH SPECS
渲染引擎：写实 CGI，Keyshot / Octane 产品可视化美学。分辨率：9:16，超高细节。
景深：等效 f/16——全部清晰对焦。无散景。产品细节边缘极其锐利。色调映射：干净、真实还原。无电影式暗部压缩。无暗角。无颗粒。色彩分级：中性，忠实于真实产品色彩。仅在象牙色背景上有轻微暖意。皮革或织物无 AI 塑料感法线贴图。需要微观表面瑕疵贴图。背景无反射。无环境反射——仅限棚内。风格参照：Louis Vuitton / Bottega Veneta / Celine 官方电商与活动摄影标准。足够干净，可用作新闻稿图片。

[BRAND NAME] + [PRODUCT]

Act as a Senior Luxury Fashion Art Director and Studio Photographer specializing in high-end product key visuals for flagship campaigns, e-commerce editorials, and mobile-first brand content.

PHASE 1: FORMAT & CANVAS
Vertical format, 9:16 aspect ratio. Canvas background: a single flat field of warm off-white — not pure white, not grey. Target tone: soft ivory cream (#F4EFE6 equivalent), uniform and completely shadowless
across the entire background plane.
Autonomously determine [BRAND NAME]'s signature background tone — if the brand has a recognized house color for its packaging, tissue paper, or lookbook backgrounds, shift the canvas toward that specific off-white or neutral. The result must feel like an official brand document, not a generic studio.

PHASE 2: BACKGROUND PATTERN (WATERMARK LAYER)

Autonomously identify [BRAND NAME]'s iconic surface pattern, monogram, or archival motif — examples: a house monogram, toile print, geometric logo repeat, heritage emblem, or signature textile pattern.
Render this pattern across the entire background canvas as a ghost watermark: same tone as the background but with a slight value shift (approximately 8–12% darker
or lighter than the base). The pattern must be large in scale — individual motifs spanning 15–25% of canvas width. Opacity: 10–18% maximum. No hard edges. The pattern should feel embossed or tone-on-tone woven, not printed. It must recede behind all other elements.

PHASE 3: LOGO PLACEMENT

Autonomously reproduce [BRAND NAME]'s official logo with complete fidelity — correct letterforms, proportions, secondary marks (emblems, crowns, stars, monogram icons).
Place the logo centered horizontally in the upper third of the frame (top 30% of canvas). Scale: the logo should span approximately 40–50% of canvas width — prominent but not overwhelming.
Logo rendering: flat 2D, no extrusion, no chrome. Color: autonomously apply [BRAND NAME]'s official logo colorway — the exact brand-standard color(s) used on official packaging and website. If the brand uses a two-tone logo (icon + wordmark in different colors), preserve that hierarchy precisely.
Directly below the main logo mark, place the full [BRAND NAME] wordmark in spaced capital letters — clean, geometric sans-serif, tracking: +200 to +300,
same brand color, optical size approximately 60% of logo height. No decorative elements between logo and wordmark.

PHASE 4: PRODUCT PLACEMENT

Render [PRODUCT] as a photorealistic studio object with maximum material fidelity:
— Leather: visible grain, pore structure, stitching thread texture, realistic edge paint.
— Hardware: gold or silver metal with micro-reflections, not flat.
— Canvas/fabric: woven fiber detail, not smooth CG.
— All brand-specific surface patterns on the product must be accurate and legible.
Placement: the product enters the frame from the bottom-right corner at a natural 25–35 degree angle, as if casually placed or mid-motion. The product is cropped — only 60–75% of the object is visible
within the frame. The crop should feel intentional and editorial, not accidental. The product occupies the lower 55–65% of the canvas.
The product must feel physically present in the space — not floating. Cast an extremely soft, barely visible contact shadow (opacity 8–12%) on the canvas beneath the nearest edge. No hard drop shadows.

PHASE 5: LIGHTING

Lighting: simulated large north-facing studio window light. Soft, directional, shadowless on the background. Color temperature: 5500–6000K (neutral daylight, slightly cool).
Key light: large softbox equivalent from upper-left, filling the entire product surface evenly with
minimal contrast ratio (1.2:1 to 1.5:1 max).
Fill light: large bounce from right side, eliminating all harsh shadows. No rim light. No dramatic contrast. The lighting philosophy is: "the product sells itself — light only reveals, never performs."
Global Illumination enabled for subtle inter-reflections between product surfaces. No specular hotspots on leather — only on metal hardware.

PHASE 6: TYPOGRAPHY & FINISHING

Bottom of frame: a thin horizontal rule line (1px, brand color, 80% canvas width, centered). Below the rule: a single line of micro-copy — a social handle, collection name, or campaign label — in the same clean sans-serif, lowercase or small-caps, minimal tracking. Autonomously generate a contextually appropriate label for [BRAND NAME].

TECH SPECS

Render engine: photorealistic CGI, Keyshot / Octane product visualization aesthetic. Resolution: 9:16, ultra-high detail.
Depth of Field: f/16 equivalent — everything in sharp focus. Zero bokeh. Tack-sharp edges on all product details.Tone mapping: clean, true-to-life. No filmic crush. No vignette. No grain. Color grade: neutral, faithful to real product color. Slight warmth in the ivory background only. No AI-plastic normals on leather or fabric. Microscopic surface imperfection maps required. No reflections on background. No environmental reflections — studio only. Mood reference: Louis Vuitton / Bottega Veneta / Celine official e-commerce and campaign photography standard. Clean enough to be used as a press image.

📷 Images